Black & White Tap

Use the Black and White taps for easy flow from the drums. Plug the product in at the bottom and it use it as a tap to flow the product out. The tap is suitable to use for solvents and chemicals. 

How to install one of our black screw in taps:

Our black screw in taps can be a little tricky to install if you have never done it before so here is a quick step by step on how to install them:

1. Tip the drum on its back
2. Remove the little circular piece that is near the bottom of the drum.
3. Once this piece has been removed, screw the tap into the thread and tighten till tap facing down toward bottom of drum.
4. Tip The drum back up and your tap will work perfectly. For faster flow, open the drum screw cap lid.

When you are finished using the tap suggest making sure that you have closed the tap properly to save leaking every where on you can tip it back on its side to be extra safe.